UNO Latching System

Product Code: UNI-SIX-003

£69.33

The MCS-6E Universal Mini Controller is pre-programmed to accept up to 4 positive inputs and 2 negative inputs via suitable latched low current switches, however not all have to be used as it depends upon the configuration required.

Supplied with a pre-programmed MCS-6E Universal Mini Controller.

Switches are sold seperately, a selection of switches are available to order, click the link to view our current range.

Specification Dimensions Installation Guide Input/Output Functions

MCS-6E Features and Functions:
• Pre-programmed to switch on two sets of outputs depending how many times the single push button is pressed
• 6 x 10Amp solid state relay outputs
• Collective total current rating is 24 Amp
• Each output can be current protected set at 5 or 10 Amps - no external fuses required
• Side light input for illumination control - positive
• Input Ignition input for wake-up control - positive
• Input Low battery ‘auto shut down’ feature sets in when voltage level falls below 11.5 volts for more than 30 seconds
• Automatic ‘sleep mode’ sets in after periods of inactivity or low voltage
• 12 and 24 volt operation

• 3 year manufacturers warranty

MCS-6E Unit Dimensions

Input Relationship with Outputs

INPUT
SWITCH SENSE
OPERATES
IP1
Positive
OP1
IP2
Positive
OP2
IP3
Positive
OP3
IP4
Positive
OP4
IP5
Negative
OP5
IP6
Negative
OP6

Output Functions

OUTPUT
FUNCTION
EXAMPLE BLUE LIGHT USE
EXAMPLE AMBER LIGHT USE
OP1
1st Individual Device
Front Blues
Towing Lights On
OP2
2nd Individual Device
Rear Blues
Roadside Working Lights On
OP3
3rd Individual Device
Rear Reds
Rear Work Lamps On
OP4
4th Individual Device
Off-Side Alley
Front Work Lamps On
OP5
5th Individual Device
Near-Side Alley
Winch Active
OP6
6th Individual Device
Siren Arm
Interior Lights On

Note: Each output can drive any appropriate device so long as each is rated under 10 Amp with a collective total of 24 Amp.
Note: This device is specifically pre-programmed to operate as described above.