FleetMotus Medius

Product Code: DLH-422

£225.00

The FleetMotus Medius device usually operates on a web based platform, but for organisations requiring direct control over the system a local server may be a more appropriate option. In either case the system can monitor a fleet or individual vehicles, to streamline their deployment and reduce accidental damage as well as their abuse.

Unlike the Nexu range of devices vehicle data is not collected via the OBDII connector but by hardwired connections either through 1 x Analogue Inputs or 3 x Digital Inputs or a separate CAN Bus device, as well as monitoring signals from sensing devices when required. Therefore, giving the Medius increased functionality over the Nexu devices. Where the data is then presented as a variety of information regarding vehicle usage and how the driver of a vehicle is behaving either as an individual or relation to others.

    Price includes: 12 months sim card data, 12 months tech support and 12 months device license!

    Features Monitoring Function
    • The Medius is a very small compact device that also has the advantage of built in antennas
    • Incorporating 'new' generation GSM (Mobile Phone Network) / GNSS (Satellite Navigation) modules to give the fastest 'cold' and 'hot' start-up times
    • It is straight forward to install and in its simplest form only 3 wire connections are required
    • The unit has 4 inputs (1 x Analogue and 3 x Digital)
    • Also 2 outputs are available to provide instant driver behaviour feedback or turn other devices on and off
    • Automatic Calibration (during first few journeys)
    • 10 to 30 Volt Operation - less than 2mA current consumption in deep sleep mode
    • Internal Back-Up Battery
    • Energy saving sleep and deep sleep mode
    • Hardwired connections
    • Increased functionality available by optional Light Vehicle CAN Bus Adaptor and RFID Driver ID as offered with the FleetMotus Magna Elite system
    • Options of Garmin FMI Support, i-Button Driver ID and Voice Communication also available
          
    • Smart algorithm of data acquisition (time, distance, angle, ignition and event based)
    • Events on I/O detection and sending via GPRS or SMS
    • Tri-Axis dual level accelerometers to translate vehicle movement with remotely adjustable levels to suit vehicle type and preferred (acceptable) driving style
    • Real time and historic tracking with speed recorded from Satellite Navigation (GPS) signal and/or vehicle CAN Bus
    • 4 x Analogue (variable) inputs (could be used as digital on/off signals). One normally used to monitor vehicle battery voltage with others available to monitor emergency/utility equipment, and temperature etc
    • 4 x Digital (on/off) inputs. One normally used to monitor vehicle ignition with others available to monitor on/off emergency/utility equipment, and PTO etc
    • 4 x Digital (on/off) Outputs to control external relays, indicators and buzzer, typical driver feedback in traffic light format: Green = Good, Amber = Average, Red = Poor
    • 1- Wire interface protocol
    • 2 x Status LEDs
    • USB interface and 2 x RS232 ports
    • Internal GSM and GPS antenna's

    Vehicle Dependent Features - signals must be available to read from vehicle CAN Bus and if Light Vehicle CAN adaptor is fitted.